Stanko Drill Manual

• Floor Mounted Drill Press Owner’s Manual WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may result in serious personal injury. Items #49383, #49384, #49385.
• A radial drill machine or radial arm press is a large geared drill head that is mounted on an arm assembly that can be moved around to the extent of its arm reach. The radial, vertical and swing movement which the machine is capable of, enables to locate the drill spindle at any point within a very large space required by large and odd shaped jobs.
• Specifications 10” 4-Jaw Chuck Bore: 2” Spindle speed: 16 – 2000 Voltage: 220V, 3ph, 60hz Quick change tool post Newall DRO 2 Axis Thread dial Tailstock: Morse 5 (1.5”) Thread: 2tpi Rapid traverse 20” x 57” Taper attachment ST#: 351 Contact Us (780) 465-3667sales@stancanada.comwww.stancanada.com.
• Stankoimport (Stanko) 6P Series Ram Head & Knee Type Milling Machines - Horizontal, Vertical and Ram Head including the 6P82W and 6P83W Ram Head Types - for which the manual was written - but also covering the knee and table assembles of the following (allowing for the usual confusing listing employed by Stanko) 6P82, 6P83, 6P82R, 6P83R, 6P82W, 6P83W, 6P12, 6P13, 6P12b and 6P13b Operator's.

Oil Field & Hollow Spindle Lathes. 33” x 120” (840mm x 3,000mm) Stanko/Sasta 12.2” Hollow Spindle Lathe Model 1A983-3.

</div>

• </a></li>
• </a></li>
• </a></li></ul></div>
  </div>

  </div>

  </div>

  </div>

  </div></div></div></div>','load_all':false,'error_template':'

  {{ERROR}}

  </div>','thumbs_position':'bottom','arrow_position':'inside','toolbar':false,'infobar':true,'show_smallbtn':true,'inner_caption':true,'caption_position':'float','idle_time':false,'click_content':false,'click_slide':false,'click_outside':false,'animation_duration':false,'transition_duration':false,'small_btn_template':'</a>'}'>

  Specifications

  Manufacturer: Stanko

  YOM: 1988

  Conditioned Drilling capacity:
  – In steel: 50 mm
  – In cast iron: 63 mm

  Spindle overhang:
  – Max 1600 mm
  – Min 375 mm

  Distance from spindle nose to working surface of table:
  – Max. 1 600 mm
  – Min. 450 mm

  Spindle taper: MT5

  Max spindle travel: 400 mm

  Spindle speed range: 18-2000 rpm

  Number of feedings: 24

  Range of feedings: 0.045-50 mm/rev

  Main motor power: 5.5 kW

  Dimension: 2850x1030x3430 mm

  Weight: 4 700 kg

  Contact Us About This Listing:

  Or simply contact us via email: info@brmachinery.com

  Other Listings You Might Be Interested In:

  Vertical turning lathe SEDIN 1512 |Horizontal Boring Machine Ryazan 2652 |Horizontal Boring Machine Stanko 2B660F1 |Gear grinding machine Stanko 5A868 |Radial Drilling Machine Stanko 2A576 |Jig Grinding Machine MITSUI SEIKI 3GB |Plano Milling Machine Stanko 6625T |Double-crank press Voronez K3735A|Single-column Planing Machine STANKO 7110 |Air forging hammer C frame Stanko Voronez MA 417

TECHNICAL DETAILSManufactured by Stanko (Russia)
Year of manufacture 1981
Drilling in steel of average hardness, mm 50
Distance from an axis of a spindle up to column, mm 375...1600
Distance from spindle nose up to a plate, mm 450...1600
Vertical moving of a sleeve on a column, mm 680
Axial moving of a spindle, mm 350
Cone of a spindle, Morse 5
Weight of the tool operated by a counterbalance at the greatest supposed inhaling{prolongation}, kg 30

Stanko Drill Manual Pdf

Amount of speeds of rotation of a spindle: 19

Limits of numbers of turns in a minute: 20...2000
Spindle drive electric-motor capacity, kW 4,5
Arm movement electric-motor capacity, kW 1,7
Machine overall dimensions, mm 2625 х 968 х 3265
Machine weight, kg 4700

It is intended for drilling, boring, countersinking, expansion, boring of apertures, cutting of a grooves and etc.

The drilling machine is in good and working condition. It is under power.

Chat with us

Stanko Drill Manual 2017

Download specifications and pictures in PDF

Stanko Drill Manual Online

MY RECENT ITEMS